![Colibrium Additive](/img/default-banner.jpg)
- Видео 149
- Просмотров 1 804 879
Colibrium Additive
Германия
Добавлен 2 ноя 2016
At Colibrium Additive, we’re passionate about the transformative power of advanced manufacturing. In the past few years, we have built a tremendous network of teams and sites that are advancing additive manufacturing every day. And as a notable user of additive technologies, we recognize the value and potential it brings to modern design and manufacturing challenges.
M Line Production System
Engineered with an innovative modular machine architecture that offers unprecedented automation, the M LINE FACTORY enables economical series production on an industrial scale.
The M LINE FACTORY offers a new type of modular machine architecture which offers an unprecedented level of automation and innovation, that allows economical series production on an industrial scale.
The basic idea is to physically decouple the machine units used for part production and for set-up and dismantling processes. These tasks can now be carried out in parallel and physically separately from one another thanks to the modular architecture.
As a result, current stoppage times for the machines, as a result of ma...
The M LINE FACTORY offers a new type of modular machine architecture which offers an unprecedented level of automation and innovation, that allows economical series production on an industrial scale.
The basic idea is to physically decouple the machine units used for part production and for set-up and dismantling processes. These tasks can now be carried out in parallel and physically separately from one another thanks to the modular architecture.
As a result, current stoppage times for the machines, as a result of ma...
Просмотров: 416
Видео
Formnext Forum - Electron Beam PBF Presentation
Просмотров 195Год назад
Formnext Forum - Electron Beam PBF Presentation
Amp - Reviewing and editing slice and process parameters
Просмотров 64Год назад
Amp - Reviewing and editing slice and process parameters
Environment, Health and Safety - Best Practices in Additive Manufacturing | GE Additive On-Demand
Просмотров 1,3 тыс.2 года назад
Additive manufacturing has proven to be a disruptive technology that is opening the door to innovating products and boosting efficiency. But inherent with new technologies is the need to examine the health and safety risks that are introduced into processes. Metal additive manufacturing uses well-known and proven materials, but new risks and hazards that arise from processing methods must be ta...
Additive Manufacturing Economics - A Critical Piece to the AM Business Case | GE Additive On-Demand
Просмотров 1,4 тыс.2 года назад
Building a winning business case with additive manufacturing (AM) can be tricky. Machine behavior and architecture play an important role in productivity and overall equipment effectiveness (OEE). One of the biggest challenges in building a good business case for AM is in the way productivity is reported, and general knowledge of the process is limited. In this webinar, you’ll learn how to bett...
EBM: Today’s Impact and Tomorrow’s Potential for Additive Manufacturing | GE Additive On-Demand
Просмотров 1 тыс.2 года назад
Offering high productivity and lower cost per part, 𝗘𝗹𝗲𝗰𝘁𝗿𝗼𝗻 𝗕𝗲𝗮𝗺 𝗠𝗲𝗹𝘁𝗶𝗻𝗴 (𝗘𝗕𝗠) 𝘁𝗲𝗰𝗵𝗻𝗼𝗹𝗼𝗴𝘆 has the power to help businesses build the next generation of applications, today. EBM helps unleash a new generation of additive innovation. This leading-edge technology offers you design freedom, excellent material properties, and stacking capabilities for efficient production of parts. This webinar wil...
Materials Engineering in Additive: From Powder to Production | GE Additive On-Demand
Просмотров 1,6 тыс.2 года назад
This webinar will explain the role of the materials engineer throughout the entire manufacturing cycle. Learn more: invent.ge/3NPDGpZ Every aspect of the additive process can impact the end-state material properties. Primary variables a materials engineer must consider are listed below. ⚪ 𝗠𝗲𝘁𝗮𝗹 𝗣𝗼𝘄𝗱𝗲𝗿 𝗖𝗵𝗮𝗿𝗮𝗰𝘁𝗲𝗿𝗶𝘀𝘁𝗶𝗰𝘀: Powder characteristics such as particle size and shape will affect how the po...
Outlook on raw material quality requirements for the AM medical industry | GE Additive On-Demand
Просмотров 4432 года назад
The medical industry is successfully embracing AM with an average growth rate of 20-30% of orthopedic additively manufactured devices. Companies in highly regulated industries, such as orthopedics, require a robust quality system to ensure product and service quality. This presentation will show AP&C’s learning from servicing the medical AM industry for the last 15 years and their vision of the...
Turning Metal Additive Build Failures into Positive Learning Experiences | GE Additive On-Demand
Просмотров 7792 года назад
Build failures happen to all additive users, regardless of experience level. 🤷 They are unavoidable pitfalls in an additive journey and often provide valuable learning experiences. A number of factors can contribute to build failures. Once you understand the reasons behind these events, you can adjust your processes and implement procedures to avoid similar failures from occurring. With hundred...
GE Additive's Amp Video with Captions
Просмотров 1,8 тыс.2 года назад
GE Additive's Amp Video with Captions
Materials Myth Conceptions: Binder Jet
Просмотров 6352 года назад
Materials Myth Conceptions: Binder Jet
Can you produce aluminum parts with EBM technology? | GE Additive Material Myth Conceptions #5
Просмотров 8092 года назад
Can you produce aluminum parts with EBM technology? | GE Additive Material Myth Conceptions #5
Is Hot Isostatic Pressing (HIP) process always required? | GE Additive Material Myth Conceptions #4
Просмотров 7532 года назад
Is Hot Isostatic Pressing (HIP) process always required? | GE Additive Material Myth Conceptions #4
Materials Myth Conceptions: Use of Multiple Materials
Просмотров 3382 года назад
Materials Myth Conceptions: Use of Multiple Materials
Do additive parts require stress relief heat treatment? | GE Additive Material Myth Conceptions #3
Просмотров 7372 года назад
Do additive parts require stress relief heat treatment? | GE Additive Material Myth Conceptions #3
Materials Myth Conceptions: Surface Finish
Просмотров 4762 года назад
Materials Myth Conceptions: Surface Finish
Materials Myth Conceptions: Weldability
Просмотров 2452 года назад
Materials Myth Conceptions: Weldability
People who see the world differently | GE :60 Commercial
Просмотров 1,9 тыс.2 года назад
People who see the world differently | GE :60 Commercial
Additive Technology For the Ready | GE Additive Brand Overview
Просмотров 1 млн3 года назад
Additive Technology For the Ready | GE Additive Brand Overview
Arcam EBM Powder Recovery Station (PRS 30)
Просмотров 2,5 тыс.3 года назад
Arcam EBM Powder Recovery Station (PRS 30)
Direct Metal Laser Melting (DMLM) | GE Additive
Просмотров 9 тыс.3 года назад
Direct Metal Laser Melting (DMLM) | GE Additive
Kelly Brown, the engineering operations leader at GE Additive | TIPE 3D Printing
Просмотров 2063 года назад
Kelly Brown, the engineering operations leader at GE Additive | TIPE 3D Printing
Leslie Frost, the marketing operations leader at GE Additive | TIPE 3D Printing
Просмотров 803 года назад
Leslie Frost, the marketing operations leader at GE Additive | TIPE 3D Printing
Accepted.
Do you provide Copper Nanopowder of size range below 100 nm?
This is how M&M's are made
Can I use this video for educational Purpose?
New product: ruclips.net/video/IXbGzTeiWQc/видео.html
Okayyyy a superbowl ad for a engineering raw material coool ad man....
hi guys, what machines are you using? where can we get more info about it?
Fuck off close to forged fucking bullshitter.
😊 "Promo SM"
So what is the normal production process for 7075 and the like? I thought they weren't cast-able in atmosphere? Induction melt and cast under argon?
What's the price of machine.
AP&C is the bomb!!! Best powder in the game
This is great information, Dave. Looking forward to seeing you and the GE Additive team at Formnext Forum Austin.
Hello, currently I'm creating a learning media for students at Vocational High School. One of the topics is additive manufacturing. I found out that your video can help students to understand the topic. Do you mind if I put the link on my learning media as a reference for my students to learn? Thank you very much.
I was surprised !!!!!!! When tested additive manufactured materials ended up being stronger with better grain structure and overall composition than most CNC machined parts made out of barstock. It means that 3D printed materials that are printed then machined are excellent with less wastage and have a higher overall quality. A great new technology to add to our science and manufacturing processes going forward. 😎
❤🙏🏼
Froud hai 1880mar ke fas gaya huu 😡
better microphone?
Amazing insight
who is the ladyt doing intro and "extro" ?????
We are in a race to end our race
Very good seminar. I have been researching Fire and Health Hazards for AM for some time now and learned new things from this video.
Amazing work! Love to hear more in the future 😃
Agreed.
Amazing work! Love to hear more in the future😃
Agreed.
Am I missing something here? How can you heat up a volume to 1000°C, when there is no medium (air) to carry the heat?
You sinter it with a 6.5kw electron beam similar to that of an electron microscope.
I am at TIPe23
Thanks I think
Awesome!!! I awake to now to write about Additive manufacturing✌😇
What a waste of time.
Eco Tech Park in Bangladesh would like to GE Additive Manufacturing of HITECH parts for EVs, Aircraft and Medical Equipments ,AI Robotics and Light weight electric Planes ♻️☘️♻️ Energy Systems Enterprise (ESE) .for Clean Energy Products & Services 👍
Thank You Madam! Highly Comprehensive! Thanks again.
The machine can print jewelry and gold designs
The machine can print jewelry and gold designs
The machine can print jewelry and gold designs
Doubt cleared in one minute🙏♥ Thanks for saving my time❗
What about CF3D Printing?
Think i was at this one too!
i tried to add Sarah Ul as a contact from Digital Day with Metrix - an ASME company- i ended up here! I liked it obviously.........
Missed this one but on board now
Froud
Kyon bhai
froud
💯 🄿🅁🄾🄼🄾🅂🄼
Incredible, quick question: What is the alloy used for this atomization? Is it the Ti6Al4V alloy? Working on a small college project and this subject is so mesmerizing.
might be pure Ti
Great, i can start my own company :D but i need 10 year for save money to bought those machine
Very helpful..Thank you
Glad it was helpful!
How does this compare in strength compared to forged products e.g a crankshaft
Thank you for that precious information
Any time!
fascinating - I like the idea of utilizing a solid rod in an effort to seemingly control your micron size.. there is likely an equilibrium to be found where you need to regulate the feed rate of the wire versus the ambient heat in the chamber. unless that is over come by the argon? fascinating work you all do.
That's the whole idea, you nailed it. As opposed to atomizing a melt pool, they atomize a tip of wire
Great, thank you very much for this quite interesting video! Could you maybe post a contact to get more details?
Hi Florian- Thank you! A member of our team would be happy to connect with you. Please fill out this form and we will be in touch: invent.ge/3LAkeMK
Brilliant ii will definitely useful for tomorrow s Exam about A.M
Good luck! 🤞🤞🤞🤞
@@colibriumadditive i had written above pass marks ... Hope i wiil pass 😋